In PG&E, SCE, and SDG&E, system cannot exceed 150% of customer's previous 12- month consumption, or projected consumption if new construction or less than 12 months of usage history, or 150% of projected consumption if recently changed usage pattern (for example, with a new EV purchase).

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

Palmetto requires all systems to be sold, applied for and installed under the RRES Netting option.

Inverter nameplate cannot exceed 25 kW AC

Expected annual production cannot exceed 105% of the customer's highest annual consumption over the past 5 years. Systems intended to be built in excess must indicate the customer's intention to purchase up to 2 electric vehicles or a whole home heat pump.

Homes constructed prior to Jan 1, 1980, must complete a Home Energy Assessment or a qualifying DOE HE Score or WAP Assessment.

LightReach requires the Payment Beneficiary on the RRES Application to be the customer of record. This will allow the Vendor ID field to be bypassed. Do Not set Palmetto/LightReach as the Payment Beneficiary.

System cannot exceed 180% of customer's previous 12- month consumption.

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

Inverter nameplate cannot exceed 10 kW AC.

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

System cannot exceed 200% of customer's previous 12- month consumption

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

System cannot exceed 100% of customer's previous 12- month consumption

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 or ANSI c.12.20 standards required.

System size changes: System size increases larger than 10% (kW DC) after initial registration require a new application submission.

Co- location: Is not permitted under the ADI Program. All facilities must be serving separate net metering customers.

Inverter nameplate cannot exceed 25 kW AC.

System cannot exceed 120% of customer's previous 12- month consumption.

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

Inverter nameplate of installed system cannot exceed 50 kW AC.

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required.

Array photos must clearly show each panel so they are countable.

Important: All partners must complete Compliance Process A (for Company owners) and Compliance Process B (for sales representatives) before being granted access to issue LightReach contracts in Illinois.
​
Partners are also responsible for maintaining Program compliance and abiding by the Consumer Protection Handbook at all times.

Revenue Grade kWh Production Meter certified to ANSI c12.1-2008 standards required

Array photos must clearly show each panel so they are countable

DG Rebate Terms and Conditions (Signed & dated if ComEd)

Photo(s) of correct Smart inverter settings selected

Disclosure form will automatically generate as a "roof mounted" system, even if ground mount is selected. Homeowner should proceed forward with signature, as this will not impact M0/M1/M2 approval.

IMPORTANT - If the Utility Account holder and Contract holder are different people, the relationship between these persons must be made clear. See table below.

Ameren: Picture of the Illinois Volt-Var Set points properly configured on the inverter display

ComEd: Pictures of all properly configured settings found on the DG Rebate Required Smart Inverter
Settings Informational Sheets. Can be from the Commissioning app or inverter display.